How to Prepare a BOQ for Dismantling and Demolition Works?
Preamble for the Dismantling Work Bill
of Quantity
The rate for all demolishing and dismantling to include carting and
disposing of the debris outside the site at approved State/Municipal Dumping
grounds as per Project Manager's instruction. Necessary propping, shoring,
and/or underpinning shall be provided for the safety of the adjoining work or
property, which is to be left intact, before dismantling and demolishing is
taken up, and the work shall be carried out in such a way that no damage is
caused to the adjoining work or property. While dismantling plumbing &
sanitary fittings & pipeline, in case any builder-related
connection/fixture gets affected, the same will be replaced by the Contractor
free of cost. The bidder should engage a skilled team to isolate the live
services prior to starting dismantling. The necessary protection process should
cover under the dismantling vendor's scope. Temporary partition and one-side
finishing can be under the dismantling vendor's scope. The rate for all
demolishing and dismantling to include carting and disposing of the debris
outside the site at approved State/Municipal Dumping grounds as per Project
Manager's instructions.
How to Prepare a BOQ for Demolition of
Existing Granite/Tile Hard Flooring
Demolition of Granite/Tile Hard
Flooring Including Mortar, Screeding, and PCC
Demolition of the existing granite/tile (all types) hard flooring
including mortar, screeding/PCC below & carrying the debris away from the
site as per architects/PM instruction. Cost to include chipping of the existing
floor once the hard floor is removed to make the floor level, etc., complete
and as directed by Engineer-in-Charge/Architect.
How to Prepare a BOQ for Demolition of
Existing Wall Tiles
Demolition of Wall Tiles and Proper
Disposal
Demolition of existing wall tiles & carrying the debris away from the
site, etc., complete and as directed by Engineer-in-Charge/Architect.
How to Prepare a BOQ for Demolition of
Gypsum, Grid, Designer, and Baffle Ceilings
Demolition of
Gypsum/Grid/Designer/Baffle Ceilings Including Scaffolding
Demolition of the existing gypsum/grid ceiling/designer ceiling/all types
of baffle ceiling & carrying the debris away from the site as per
architects/PM instruction. Cost to include scaffolding & other works
involved to remove the ceiling, etc., complete and as directed by
Engineer-in-Charge/Architect.
How to Prepare a BOQ for Demolition of
Gypsum/Ply Partitions, Tables, Service Counters, and Storage Units
Demolition of Gypsum/Ply Partitions
and Furniture
Demolition of the existing gypsum/ply partitions, tables, service
counter, storage, and above-ceiling partitions & carrying the debris away
from the site as per architects/PM instruction, etc., complete and as directed
by the "Engineer-in-Charge/Architect".
How to Prepare a BOQ for Scrubbing,
Grinding, and Removing Existing Wall Paneling/Wallpaper
Scrubbing and Removing Wall
Paneling/Wallpaper
Existing wall paneling/wallpaper scrubbing, grinding, removing &
carrying the debris away from the site as per architects/PM instruction, etc.,
complete and as directed by the "Engineer-in-Charge/Architect".
How to Prepare a BOQ for Demolition of
Existing Glass Partitions Including Doors
Demolition of Glass Partitions and
Doors
Demolition of existing glass partitions including doors and above-ceiling
partitions & carrying the debris away from the site, etc., complete and as
directed by Engineer-in-Charge/Architect.
How to Prepare a BOQ for Removal of
Existing Granite/Marble Cladding
Demolition of Granite/Marble Cladding
Demolition of existing granite/marble cladding & carrying the debris
away from the site, etc., complete and as directed by
Engineer-in-Charge/Architect.
How to Prepare a BOQ for Demolition of
Existing Block Walls
Demolition of Block Walls Including
Plaster, Paint, and Doors
Demolition of the existing block wall (all sizes) including plaster,
paint, tile dado, doors, skirting & carrying the debris away from the site,
etc., complete and as directed by Engineer-in-Charge/Architect.
How to Prepare a BOQ for Scrubbing,
Grinding, and Removing Ply/Laminate Doors
Scrubbing and Removing Ply/Laminate
Doors
Existing door ply/laminate scrubbing, grinding, removing & carrying
the debris away from the site as per architects/PM instruction, etc., complete
and as directed by the "Engineer-in-Charge/Architect".
How to Prepare a BOQ for Removal and
Reinstallation of Existing Doors
Removal and Reinstallation of
Fire/Flush/Glass/PVC Doors
Removing of existing fire/flush/glass door/PVC without damages and
handing over the same with all the removed accessories, and to reinstall the
door if required as directed by "Engineer-in-Charge/Architect".
a. Single leaf door
b. Double leaf door
How to Prepare a BOQ for Removal of
Existing Carpet Floor Tiles
Removal of Carpet Floor Tiles
Including Adhesive Base
Removing of existing carpet floor tile including base adhesive without
damages and handing over the serviceable items to the Client and disposing of
the unserviceable materials/debris and carting away from the site, etc.,
complete and as directed.
How to Prepare a BOQ for Relaying
Existing Carpet Flooring
Relaying Carpet Flooring with
Protection
Relaying of existing carpet neatly, complete and as directed. Rate
includes a single layer of protection cover to be laid after installation of
carpet, etc., complete and as directed.
How to Prepare a BOQ for Deep Cleaning
Existing Carpet
Deep Cleaning Carpet Using Shampooing
Method
Deep cleaning the existing carpet floor by shampooing method and drying
the same neatly, complete and as directed.
How to Prepare a BOQ for Refixing
Flush/Fire/Glass Doors
Refixing of Flush/Fire/Glass Doors
with Accessories
Refixing of flush/fire/glass door and hardware with minimum accessories
like anchor bolts, screws, etc., complete and as directed by the
"Engineer-in-Charge/Architect".
a. Single leaf door
b. Double leaf door
How to Prepare a BOQ for Dismantling
Existing Electrical Works
Dismantling of Electrical Works Based
on Site Survey
Dismantling of existing electrical works, etc., complete and as directed
by the "Engineer-in-Charge/Architect". (Vendor to quote as per the
site survey)
How to Prepare a BOQ for Dismantling
Existing HVAC Works
Dismantling of HVAC Works Based on
Site Survey
Dismantling of existing HVAC works, etc., complete and as directed by the
"Engineer-in-Charge/Architect". (Vendor to quote as per the site
survey)
How to Prepare a BOQ for Dismantling
Fire Alarm and Public Address Systems
Dismantling of Fire Alarm System (FAS)
and Public Address (PA) Systems
Dismantling of existing FAS, PA works, etc., complete and as directed by
the "Engineer-in-Charge/Architect". (Vendor to quote as per the site
survey)
How to Prepare a BOQ for Dismantling
Plumbing and Sanitary Works
Dismantling of PHE Works Including
Restroom Cubicles and Drainage Lines
Dismantling of existing PHE works not limited to existing restroom
cubicles, sanitary fittings, plumbing supply & drain line, etc., complete
and as directed by the "Engineer-in-Charge/Architect". (Vendor to
quote as per the site survey)
How to Prepare a BOQ for Groove
Cutting and Dismantling Grano
Groove Cutting and Dismantling Grano
as per Raceway Marking
Groove cutting and dismantling the existing Grano as per the raceways
marking and removing the debris, etc., complete complying with standard
specifications and as directed by the "Engineer-in-Charge/Architect".
How to Prepare a BOQ for Removing
Existing Blinds
Removal of Blinds While Retaining
Serviceable Items
Removing existing blinds, etc., without damages and handing over the
serviceable items to the Client and disposing of the unserviceable
materials/debris and carting away from the site, etc., complete and as directed
by the "Engineer-in-Charge/Architect".
How to Prepare a BOQ for Dismantling
Raised Floor Systems
Dismantling and Handling Raised Floor
Systems
Dismantling of existing raised floor system, etc., without damages and
handing over the serviceable items to the Client and disposing of the
unserviceable materials/debris and carting away from the site, etc., complete
and as directed by the "Engineer-in-Charge/Architect".
Conclusion
This guide provides a detailed framework for preparing a Bill of
Quantities (BOQ) for various demolition and dismantling works, ensuring
compliance with project requirements and proper disposal of debris as per the
Engineer-in-Charge or Architect’s instructions.
No comments:
Post a Comment