In this article, we explained how to prepare a bill of quantity for wall finishes Pop Wall Finishes, Wall Painting, Luster painting, Wall Papering in walls and Texture Painting in walls
General Note to be mentioned in BOQ (Bill of quantity) in wall finishes: Providing and applying three coats of pre-approved brand ________ paint to walls, partitions etc. including surface preparation with two coats of putty, primer and sanding all complete. With the necessary drying periods for each coat.
The final finish should
be of a uniform and neat finish to the satisfaction of the Architect. Cost to
be included for all height and surfaces. (Low VOC paint)
Contractor shall protect the entire furniture provided
by him or other agencies before starting the painting / punning work and shall
be held responsible for any stains or damage including aluminum windows, AC
grilles, Diffusers, grid ceiling, Modular furniture, carpet etc. (Featherlight)
BOQ of Wall finishes Sample format
How to prepare BOQ for POP Wall Finishes?
BOQ of POP Wall Finishes
Providing and applying Asian/JK /Birla Putty Plaster of
Paris punning of average thickness 12mm to existing wall surfaces in true level
and plumb complete as directed. The cost to include providing grooves at
junctions wherever required as per the instructions of the Architect.
How to prepare BOQ for Wall Painting?
BOQ of Wall Painting
Wall Painting - Option 1
Applying 2/3 coats of putty in wall / ceiling to get a
seamless and even finish for finishing with any kind of paint. Cost to include
subsurface preparation.
Providing and applying punning up to 10-15 mm thick
layer of super fine Plaster of Paris applied over selected existing plastered
surface on walls and columns finished smooth, rate is inclusive of necessary
surface preparation including all incidentals, along with making grooves of 6mm
wide in the POP at the junction/end of walls or as directed, pattas, sills,
etc. complete. The finished surface should be smooth and in perfect level to
avoid unevenness and ready to take on paint.
Providing & applying Acrylic Emulsion Paint of
approved shade and color in minimum two coats, including one coat of primer,
preparation of surface, scrapping, sand papering, scaffolding etc. complete
White paint:
Accent paints:
Applying flat enamel grey /black paint on exposed GI AC
Ducts, pipes, conduits, and cable trays etc, in exposed areas of ceiling.
Ceiling area shall be measured and paid
BOQ of Wall Painting
Wall finishes - Option 2
Acrylic Emulsion Paint
Providing and applying ________ Acrylic Emulsion (Premium)
paint finish to walls, blocked partitions, and plasterboard ceiling surfaces of
approved shade, texture.
Existing wall surfaces to be prepare by scraping away
any loose particles, dust, etc by washing and scrubbing and 1 coat of primer
approved by manufacturer applied. The wall surfaces are then smoothened using
putty approved by the manufacturers. Surfaces are then sandpapered to achieve a
smooth finish and two or more coats of paint are applied as per manufacturer's
specification.
Mode of measurement:
Length & height of the Painted surface shall be measured for payment.
How to prepare BOQ for Luster painting?
BOQ of Luster painting
Luster painting
Providing and applying _______ luster paint finish to
walls, blocked partitions, and plasterboard ceiling surfaces of approved shade,
texture.
Existing wall surfaces to be prepare by scraping away
any loose particles, dust, etc. by washing and scrubbing and 1 coat of primer
approved by manufacturer applied. The wall surfaces are then smoothened using
putty approved by the manufacturers. Surfaces are then sandpapered to achieve a
smooth finish and two or more coats of paint are applied as per manufacturer's
specification. (Metal Extrusion)
How to prepare BOQ for Wall Papering in
walls?
BOQ of Wall Papering in walls
Wall Papering in walls
"xxx Stickering Works”
Providing and fixing Vinyl graphic design print of 3M
Scotched 7725 Series or other brand approved equivalent make on Glass
Partition/ wall in pattern as per drawings as per manufacturer's specifications
with MCS warranty etc. complete. (Basic cost Rs. ______ per sq/ft) -Rate to
include surface preparation "
How to prepare BOQ for Texture Painting in
walls?
BOQ of Texture Painting in walls
Texture Painting
Providing and finishing Textured paint in _________
No comments:
Post a Comment